top of page
Can-Am Maverick Rear A Arms (2013-2014)
  • Can-Am Maverick Rear A Arms (2013-2014)

    Rear A arms 2013-2018 MAX, XDS, XRS, TURBO

    Sealed bushing kit that includes all bushings, pins. 

    This kit includes bushings for the coupling bars. 

    If you do not need the coupling bar bushings get the 2015-2017 kit.


      Install grease fittings first. Then use a rubber mallet (Do not use a vise on these) to gently tap BOTH bushings in each end,  Pack with grease inside and on pin. With opposite side on a solid surface use a mallet to tap the steel pin all the way in. to Once the bushings are properly installed and a arms are on the machine, use a grease gun connected to the grease zerk fittings to pump grease into the bushing. You should pump grease until you feel resistance and then stop, do not force grease in after you begin to feel resistance as this could damage the O-ring seals. You should try to pump grease into the grease zerk fitting at each maintenance interval but after the initial installation they should not take much, if any grease.

    • Shipping

      Shipping is included in price. 

      USPS Priotity mail 2 to 3 business days.

    • Lifetime Warranty

      Lifetime warranty on bushing kits.
      Terms of Warranty:
      Item must have been purchased   directly                                                   from us to the original buyer.                                                                      Bushings must have grease when installed.
       Warranty does not cover damage from a crash, hitting a tree, running off a cliff or any other type of hard hit.
      Defective bushing and pin MUST be sent back to us to test and inspect. A copy of your original invoice / sales receipt MUST be sent with the item as well.
      Buyer will be responsible for paying shipping for the newly exchanged items being sent back to the buyer.

    bottom of page