Weld In Step Washers for 10mm Suspension Bolts
Take care of the egged holes in your suspension tabs with these custom CNC Machined Step Washers for 10mm bolts. These are sold in Kits of 16. This kit is enough to do a front end on a Polaris RZR or Can-Am
Longer bolts are recommended but you can also reuse your stock bolts if you get a shorter lock nut.
Use a Step drill and drill out your egged holes to 5/8 and then weld the step washers in along the outside.
THESE WASHERS FIT ALL MODELS EXCEPT THE CANAM X3!!!